110V AC Self Priming Electric Fuel Transfer Pump Oil Fuel Diesel Kerosene 16GPM
Feature:
1: Cast aluminum shell, it has excellent corrosion resistance andextends motor life.
2: Heavy duty cast iron, built to wear and tear of rough operating environments study for long service time.
3: Waterproof switch ensure safety use in humid environments.
4: 100% copper wire to ensure efficient and stable operation of the motor.
5: Self-priming design make safe and quick on-site oil trans fers without any need for lifting barrels or tanks.
6: Never start the pump before first connecting the suction and delivery tubes.
7: After closing the gun, switch off the motor pump as quickly as possible.
8: It will be opened or penn closed by the force of the liquid fl oz to prevent the liquid from flowing back to make it more safety and energy saving.
9: These pumps are designed for light oil pumping applications such as diesel fuel, biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. Is not for Gasoline fuel.
Specifics:
Condition: 100% Brand New
Contruction: Cast Iron
Voltage: 110V/60Hz
Power: 550W
Flow Rate: 20-60L/Min (5.25-15.75 GPM)
Max Pressure: 44Psi (3Bar)
Speed Range: 2800 R/min
Max Suction: 16.4ft/5m
Max Lift: 49Ft/15m
Cable Length: 3.9ft/1.2m
Import and export caliber: 1"
Continous Duty Cycle
Size: 25*17*14cm / 9.84*6.69*5.51in
Note:
1.Please allow 1-3mm difference due to manual measurement.
2.Please read this manual carefully before operating the pump!
3.This does NOT include a pre-filter. Using this pump without a pre-filter will shorten its life span due to impurities that may be in the source fuel.
Package Included:
1 X Transfer Pump
1 X Accessories Kit
1 X Manual
Feature:
1: Cast aluminum shell, it has excellent corrosion resistance andextends motor life.
2: Heavy duty cast iron, built to wear and tear of rough operating environments study for long service time.
3: Waterproof switch ensure safety use in humid environments.
4: 100% copper wire to ensure efficient and stable operation of the motor.
5: Self-priming design make safe and quick on-site oil trans fers without any need for lifting barrels or tanks.
6: Never start the pump before first connecting the suction and delivery tubes.
7: After closing the gun, switch off the motor pump as quickly as possible.
8: It will be opened or penn closed by the force of the liquid fl oz to prevent the liquid from flowing back to make it more safety and energy saving.
9: These pumps are designed for light oil pumping applications such as diesel fuel, biodiesel and kerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids & more. Is not for Gasoline fuel.
Specifics:
Condition: 100% Brand New
Contruction: Cast Iron
Voltage: 110V/60Hz
Power: 550W
Flow Rate: 20-60L/Min (5.25-15.75 GPM)
Max Pressure: 44Psi (3Bar)
Speed Range: 2800 R/min
Max Suction: 16.4ft/5m
Max Lift: 49Ft/15m
Cable Length: 3.9ft/1.2m
Import and export caliber: 1"
Continous Duty Cycle
Size: 25*17*14cm / 9.84*6.69*5.51in
Note:
1.Please allow 1-3mm difference due to manual measurement.
2.Please read this manual carefully before operating the pump!
3.This does NOT include a pre-filter. Using this pump without a pre-filter will shorten its life span due to impurities that may be in the source fuel.
Package Included:
1 X Transfer Pump
1 X Accessories Kit
1 X Manual
