Generator Stator Regulator Rectifier Gasket Set For Touring Models 2002-2003

Features:
Kit include Stator, Regulator Rectifier and gasket.
Meet or exceeds the OEM quality, direct replacement to your original unit.
Perfect fit and ready to install.
Always use a sealant to mount the cable gland joint.
Instruction is NOT included.

Attention:
One of the most common reasons a stator breaks down is due to a broken regulator, which burns the stator in no time.
Therefore we highly recommend you to switch both parts.
Technically modified stators are excluded from exchange.

Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator and Regulator Kit
Gasket Material: Paper

other specification:
Stator
Number of wires: 2
Number of plugs: 2
Number of pins: 2
Number of fixation holes: 4
Number of poles: 12

Regulator
Number of wires: 4
Number of plugs: 1
Number of pins: 2 + 1 + 1

Please compare the number of pins and plugs with the old part before purchasing.

Replacement Part Number:
Stator Assy: 2998702A, 29987-02A
Rectifier, regulator: 74505-02
Primary Cover Gasket Kit: 34901-94, 34901-94C

(Always compare part numbers to your parts schematics and cross reference appropriately.)
(This is NOT a genuine Part, OEM part numbers are included for product type identification and comparison only.)

Fits Model/Year:
Fit for Custom Vehicle Ops Road King Screamin Eagle 2002-2003
Fit for CVO Road King FLHRSEI 2002-2003
Fit for Electra Glide Classic EFI 2002
Fit for Electra Glide Classic FLHTC 2002-2003
Fit for Electra Glide Classic FLHTC DJ 2002-2003
Fit for Electra Glide Classic FLHTCI 2002-2003
Fit for Electra Glide Standard FLHT 2002-2003
Fit for Electra Glide Standard FLHTI 2003
Fit for Electra Glide Standard Police EFI 2002-2003
Fit for Electra Glide Standard Police FLHTPI 2002-2003
Fit for Electra Glide Ultra Classic EFI 2002
Fit for Police Electra Glide EFI 2002
Fit for Police Road King EFI 2002
Fit for Road Glide EFI 2002
Fit for Road Glide FLTR 2002-2003
Fit for Road Glide FLTRI 2002-2003
Fit for Road King Classic EFI 2002
Fit for Road King Classic FLHRCI 2002-2003
Fit for Road King EFI 2002
Fit for Road King FLHR 2002-2003
Fit for Road King FLHRI 2002-2003
Fit for Road King Police EFI FLHPEI 2002-2003
Fit for Road King Police EFI FLHPI 2002-2003
Fit for Road King Police Escort FLHPEI 2002-2003
Fit for Road King Police FLHPI 2002-2003
Fit for Touring Electra Glide 2003
Fit for Touring Electra Glide Classic 2003
Fit for Touring Electra Glide Classic EFI 2002-2003
Fit for Touring Electra Glide Classic Ultra 2002
Fit for Touring Electra Glide Classic Ultra EFI 2002-2003
Fit for Touring Electra Glide Classic Ultra EFI Shrine 2002
Fit for Touring Electra Glide Shrine Classic 2002
Fit for Touring Electra Glide Standard 2002-2003
Fit for Touring Electra Glide Standard Ultra 2002
Fit for Touring Road Glide 2003
Fit for Touring Road Glide EFI FLTRI 2002-2003
Fit for Touring Road Glide Ultra 2002
Fit for Touring Road King 2003
Fit for Touring Road King Classic 2003
Fit for Touring Road King Classic EFI 2002
Fit for Touring Road King EFI 2002
Fit for Touring Road King EFI Sport 2002
Fit for Touring Road King FLHR 2003
Fit for Touring Road King Police EFI FLHPEI 2004
Fit for Touring Rod Glide 2003
Fit for Ultra Classic FLHTCUI 2002-2003

(Compatibility Chart is for reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)

Package Includes:
1 x 12-Pole Generator Stator
1 x 4-Wire Regulator Rectifier
1 x Primary Gasket Kit

(Comes exactly as pictured.)

Note:
Before installing your new stator regulator rectifier;

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.