7/8" 22Mm Electric Heated Hand Grips Heating Handle Voltmeter For Motorcycle
¡¾Product advantages¡¿:
[1] The product also integrates functions such as heating, test voltage, mobile phone charging, etc.,reducing the space occupied by separate installations
[2] The product is made of imported nylon and soft TPU material, which is very flexible and resistant to low temperatures.
[3] The product is equipped with a voltmeter, which can check the battery usage at any time, reducing accidents caused by battery problems
[4] 2.1A huge current, which can supply power for mobile phones, navigation, MP3, GPS, etc. at any time, convenient and fast
[5] The product has an independent three-stage switch, the temperature of 65-85¡æ can be adjusted at will, and you can change as you like.
Features:
[Product material]: imported nylon, soft TPU material
[Handle Diameter]: 2.2cm
[Product size]: left: 11.9x11.3cm; right: 12.6x9.3cm
[Input voltage]: DC12V
[Output voltage]: 5V
[Output current]: 2.1A
[Product Power]: 26W
[Temperature Range]: 65-85¡æ
[Voltmeter test range]: 8-25.5V
[Voltmeter color]: as pictures show
¡¾pay attention¡¿:
[1] Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, when the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium gear first to prevent high temperature burns.
[2] This product is only suitable for motorcycles with 12V batteries. Please confirm the voltage of your car before installation, and read the installation diagram carefully. Incorrect voltage and wiring will cause damage to the components.
[3] This product can only be installed on the handlebars of motorcycles to be energized. You can use a battery to test whether the product is properly energized before installation.
[4] It is strictly forbidden to energize and work when not riding (empty burn) to prevent the electric handle cover from being overheated and damaging the original handlebar.
[5] It is recommended to connect the electric door lock wire for the wiring. Most models have a black positive pole and a green negative pole. For specific conditions, it is recommended to use a multimeter to measure.
¡¾Product advantages¡¿:
[1] The product also integrates functions such as heating, test voltage, mobile phone charging, etc.,reducing the space occupied by separate installations
[2] The product is made of imported nylon and soft TPU material, which is very flexible and resistant to low temperatures.
[3] The product is equipped with a voltmeter, which can check the battery usage at any time, reducing accidents caused by battery problems
[4] 2.1A huge current, which can supply power for mobile phones, navigation, MP3, GPS, etc. at any time, convenient and fast
[5] The product has an independent three-stage switch, the temperature of 65-85¡æ can be adjusted at will, and you can change as you like.
Features:
[Product material]: imported nylon, soft TPU material
[Handle Diameter]: 2.2cm
[Product size]: left: 11.9x11.3cm; right: 12.6x9.3cm
[Input voltage]: DC12V
[Output voltage]: 5V
[Output current]: 2.1A
[Product Power]: 26W
[Temperature Range]: 65-85¡æ
[Voltmeter test range]: 8-25.5V
[Voltmeter color]: as pictures show
¡¾pay attention¡¿:
[1] Please select the appropriate gear according to the ambient temperature. Under low temperature conditions, when the temperature of the electric heating grip cover cannot be sensed in time due to the numbness of the hand, please use the low or medium gear first to prevent high temperature burns.
[2] This product is only suitable for motorcycles with 12V batteries. Please confirm the voltage of your car before installation, and read the installation diagram carefully. Incorrect voltage and wiring will cause damage to the components.
[3] This product can only be installed on the handlebars of motorcycles to be energized. You can use a battery to test whether the product is properly energized before installation.
[4] It is strictly forbidden to energize and work when not riding (empty burn) to prevent the electric handle cover from being overheated and damaging the original handlebar.
[5] It is recommended to connect the electric door lock wire for the wiring. Most models have a black positive pole and a green negative pole. For specific conditions, it is recommended to use a multimeter to measure.
Delivery:
Free Shipping
Delivery Time:3-10 Working Days
Warranty:
Warranty Period:1 Years
Return:Goods can be returned within 60 days of receipt
24-Hour Support:Customer service throughout the day
