20A PWM Solar Controller Mobile APP Intelligent Control 12V/24V/36V/48V/60V Solar Controller Display Current Solar Street Light Controller 0V Start

The Specifications:
1. Rated Voltage: 12V/24V/36V/48V/60V
2. Charge Current: 20A
3. Discharge Current: 10A
4. Application: Solar System Controller
5. Size: 134*70*35mm
6. Weight: 150g
7. Standby current: <10mA
8. USB Output: 5V/2A MAX
9. Operating Temperature: -35¡«+60¡æ

Safety Instructions:
1. This controller automatically adapts to 12V/24V, or another version 12/24/36/48/60V to manually set the appropriate battery charging mode. When installing for the first time, please make sure the battery has enough voltage to start and automatically set the controller parameters.
2. Install the controller as close to the battery as possible to avoid voltage drop caused by too long wires and affecting normal voltage judgment.
3. This controller is suitable for charging lead-acid, solid, lithium batteries, lithium iron phosphate and other batteries; if charging lithium batteries, you must be familiar with its battery characteristics, and the charging parameters must be set after connecting to power before use.For example: when charging a 12V lithium battery, the output prohibition protection is set to 9.5V, the full protection is 12.2V, and the charging voltage is 11.5V when the battery drops.
4. This controller can only use photovoltaic panels as the charging source. Do not use DC or other power sources as the charging source.
5. This controller will generate heat when running. Please be sure to install the controller on a flat, well-ventilated surface
6. When charging lithium batteries, you must wear a battery protection board, and be sure to choose products from lithium battery manufacturers that are certified and meet national requirements. Direct charging without a protective board is strictly prohibited, and unauthorized modification of lithium battery packs for charging is strictly prohibited.

Features:
1. Build-in industrial micro controller.
2. Big LCD display, all adjustable parameter.
3. Full 3-stage PWM charge management.
4. Built-in lightning protection, overheating, overcurrent, short circuit protection, open circuit protection, reverse connection protection, all automatic recovery type, will not damage the controller.
5.Dual mosfet Reverse current protection, low heat production.
6. The regulated high-current side is charged and placed, and the load is stably supplied to the load under full load conditions, and is suitable for use in an inverter or a monitoring device.

Package included:
1x PWM Solar Controller
1 x User Manual