Pick-up Pulsar / Pulse Sensor Fit For Kawasaki Twin EN 400 Vulcan 450 500 EX GPz 400 500 1987-1996
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil
Dimensions:
Height: 19mm
Length: 25.9mm
Width: 20mm
Bracket center to center: 50mm
Other Specifications:
Number of wires: 4
Number of plugs: 1
Number of pick-up coil: 2
Replacement Part Number:
59026-1066
Fitments:
Fit for Kawasaki EN400 EN400 Twin 1989
Fit for Kawasaki EN400 Vulcan 400 1990-1993
Fit for Kawasaki EN450 Vulcan 454LTD 1985-1990
Fit for Kawasaki EN500 Vulcan 500 A1-A6 1990-1996
Fit for Kawasaki EX400 GPZ400S 1988-1990
Fit for Kawasaki EX500 Ninja 1987-1993
Fit for Kawasaki EX500 GPZ500S 1988-1993
Fit for Kawasaki EX500 GPZ500 1987-1993
Package Included:
1x Pick up pulsar coil
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
NOTE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Pick up pulsar coil
Dimensions:
Height: 19mm
Length: 25.9mm
Width: 20mm
Bracket center to center: 50mm
Other Specifications:
Number of wires: 4
Number of plugs: 1
Number of pick-up coil: 2
Replacement Part Number:
59026-1066
Fitments:
Fit for Kawasaki EN400 EN400 Twin 1989
Fit for Kawasaki EN400 Vulcan 400 1990-1993
Fit for Kawasaki EN450 Vulcan 454LTD 1985-1990
Fit for Kawasaki EN500 Vulcan 500 A1-A6 1990-1996
Fit for Kawasaki EX400 GPZ400S 1988-1990
Fit for Kawasaki EX500 Ninja 1987-1993
Fit for Kawasaki EX500 GPZ500S 1988-1993
Fit for Kawasaki EX500 GPZ500 1987-1993
Package Included:
1x Pick up pulsar coil
(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
NOTE:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Delivery:
Free Shipping
Delivery Time:3-10 Working Days
Warranty:
Warranty Period:1 Years
Return:Goods can be returned within 60 days of receipt
24-Hour Support:Customer service throughout the day
