WLToys V915-A New Version LAMA 2.4Ghz 4Channel Helicopter Altitude Hold Mode Aut
The new V915-A LAMA helicopter now with Altitude Mode and automatic takeoff and landing. Helicopter flights for everyone
It's finally here, the V915-A in the version with altitude hold mode and automatic takeoff and landing function. Helicopter flying just got easier and safer.
The model can be started automatically with a button on the transmitter, rises to a basic height of approx. 1-1.2 m and hovers there with inherent stability. The pilot can thus concentrate on the essential flight characteristics such as forwards/backwards and right/left. If the model drifts slightly, this can be corrected using the digital trimmers on the transmitter. Furthermore, the "ground effect" of a helicopter is faded out by the auto-start function, as it quickly climbs to its base height. The ground effect is caused by the rotors, which cause turbulence below the heli and cause the heli to drift forward to the left near the ground. It is therefore difficult to control the model at low altitude.
To land, simply press the takeoff/landing button on the front right of the transmitter again and the heli hovers gently to the ground and switches off the motor. The heli remains fully controllable even during the landing approach and the landing point can be controlled during the descent. However, the landing can also be performed manually - simply press the throttle stick down and hold it down until the model touches down and the engine switches off. Alternatively, manual launch and gyro calibration on the transmitter is also possible.
Features:
Easy to fly LAMA model perfect for ambitious helicopter beginners
Due to the size and the powerful motor, it is fully suitable for outdoor use, even in light to moderate wind
Two speed levels switchable on the transmitter (dual rate)
Technical specifications:
Product functions: ascending, descending, forward, backward, turn left, turn right, fly left and right, hover, rotate, accelerate, switch mode, and set air pressure.
Body length: 430mm
Body height: 170mm
Main Blade Length: 400mm
Tail Rotor Diameter: 128mm
Main material: Metal
Weight ready to fly: 294.5g
Remote control: 2.4GHz, 4 channels
Remote control distance : about 100m
Servos: Two mini servos with plastic gears and JR connectors
Battery: LI-POLY 7.4V 850MAH 20C hard case with integrated connector system and USB charging port
Flight time: about 7min
Charger: USB cable
Charging time: approx. 90 min(The red light is on when charging, and the red light is off when fully charged)
Number of drive motors: 370 carbon brush motor*1 N50 carbon brush motor*1
Package Included:
Color box packaging*1, helicopter*1, remote control*1, manual*1, USB charger*1, main wind blade*2, tail wind blade*1, small screwdriver*1
Required accessories:
6x 1.5V AA batteries for the remote
The new V915-A LAMA helicopter now with Altitude Mode and automatic takeoff and landing. Helicopter flights for everyone
It's finally here, the V915-A in the version with altitude hold mode and automatic takeoff and landing function. Helicopter flying just got easier and safer.
The model can be started automatically with a button on the transmitter, rises to a basic height of approx. 1-1.2 m and hovers there with inherent stability. The pilot can thus concentrate on the essential flight characteristics such as forwards/backwards and right/left. If the model drifts slightly, this can be corrected using the digital trimmers on the transmitter. Furthermore, the "ground effect" of a helicopter is faded out by the auto-start function, as it quickly climbs to its base height. The ground effect is caused by the rotors, which cause turbulence below the heli and cause the heli to drift forward to the left near the ground. It is therefore difficult to control the model at low altitude.
To land, simply press the takeoff/landing button on the front right of the transmitter again and the heli hovers gently to the ground and switches off the motor. The heli remains fully controllable even during the landing approach and the landing point can be controlled during the descent. However, the landing can also be performed manually - simply press the throttle stick down and hold it down until the model touches down and the engine switches off. Alternatively, manual launch and gyro calibration on the transmitter is also possible.
Features:
Easy to fly LAMA model perfect for ambitious helicopter beginners
Due to the size and the powerful motor, it is fully suitable for outdoor use, even in light to moderate wind
Two speed levels switchable on the transmitter (dual rate)
Technical specifications:
Product functions: ascending, descending, forward, backward, turn left, turn right, fly left and right, hover, rotate, accelerate, switch mode, and set air pressure.
Body length: 430mm
Body height: 170mm
Main Blade Length: 400mm
Tail Rotor Diameter: 128mm
Main material: Metal
Weight ready to fly: 294.5g
Remote control: 2.4GHz, 4 channels
Remote control distance : about 100m
Servos: Two mini servos with plastic gears and JR connectors
Battery: LI-POLY 7.4V 850MAH 20C hard case with integrated connector system and USB charging port
Flight time: about 7min
Charger: USB cable
Charging time: approx. 90 min(The red light is on when charging, and the red light is off when fully charged)
Number of drive motors: 370 carbon brush motor*1 N50 carbon brush motor*1
Package Included:
Color box packaging*1, helicopter*1, remote control*1, manual*1, USB charger*1, main wind blade*2, tail wind blade*1, small screwdriver*1
Required accessories:
6x 1.5V AA batteries for the remote
