Raspberry Pai 5th Generation PCIE to M.2 Rotor 8Gbps Transmission Raspberry Pi5 Expansion Board M.2 Interface
Description:
PCLE to M.2 rotary board, designed for Raspberry PI5. Support the NVME protocol M.2 interface hard disk, high -speed reading and writing, improve work efficiency
You can access PI5 through 16PIN row cable. Based on the 16PIN PCLE interface design based on Raspberry Pi 5, retain the fan air outlet and Raspberry Pi 40pin GPIO interface location
Support NVMe hard disk protocol, M.2 hard disk compatible with 2280 /2260 7 2242 /2230 size supports Gen2 and Gen3 mode, supports starting PI5 from SSD
Applicable to the hard disk interface, a gap on the front of M Key, a gap on both sides of B & M Key
Antioxidant gold technology materials
Upgrade the new vitality of the raspberry Pai, compared to the Micro SD interface of the Raspberry Pi, it has a faster read and write speed, greatly improves the read and write speed of the system or file, and supports NVME SSD to start the Raspberry Pi Pi
NVMe Gen3 theoretical transmission speed 8Gbps, measured, read, write and write speed of about 800 mb/s.
Various power supply choices, support PCLE exhaust power supply or 3PIN cable power supply power supply
The state of the dual LED indicator light is clear at a glance .Act status indicator light, the hard disk reads and write data, flickered .PWR, the power power was often bright.
Features:
Improve hard disk performance
Faster read and write speed
Compatible with multiple sizes
Sinking gold technology anti -dignified
Note:
1. Only support the NVMe hard disk protocol
2. Use the PCLE exhaust line to supply power by default, and then use the 3PIN connection line to supply power in lack of power supply
Package Include:
1x PCLE to M.2 Rotary Board Main Body
1x 16Pin PCLE lines
1x Screw bag
Description:
PCLE to M.2 rotary board, designed for Raspberry PI5. Support the NVME protocol M.2 interface hard disk, high -speed reading and writing, improve work efficiency
You can access PI5 through 16PIN row cable. Based on the 16PIN PCLE interface design based on Raspberry Pi 5, retain the fan air outlet and Raspberry Pi 40pin GPIO interface location
Support NVMe hard disk protocol, M.2 hard disk compatible with 2280 /2260 7 2242 /2230 size supports Gen2 and Gen3 mode, supports starting PI5 from SSD
Applicable to the hard disk interface, a gap on the front of M Key, a gap on both sides of B & M Key
Antioxidant gold technology materials
Upgrade the new vitality of the raspberry Pai, compared to the Micro SD interface of the Raspberry Pi, it has a faster read and write speed, greatly improves the read and write speed of the system or file, and supports NVME SSD to start the Raspberry Pi Pi
NVMe Gen3 theoretical transmission speed 8Gbps, measured, read, write and write speed of about 800 mb/s.
Various power supply choices, support PCLE exhaust power supply or 3PIN cable power supply power supply
The state of the dual LED indicator light is clear at a glance .Act status indicator light, the hard disk reads and write data, flickered .PWR, the power power was often bright.
Features:
Improve hard disk performance
Faster read and write speed
Compatible with multiple sizes
Sinking gold technology anti -dignified
Note:
1. Only support the NVMe hard disk protocol
2. Use the PCLE exhaust line to supply power by default, and then use the 3PIN connection line to supply power in lack of power supply
Package Include:
1x PCLE to M.2 Rotary Board Main Body
1x 16Pin PCLE lines
1x Screw bag
