2010-2020 Lexus GX460 HS250h RX350 RX450h Angle Sensor 89245-30110 w/Spring 84307-30090 Generic
$62.78
Angle Sensor 89245-30110 w/Spring 84307-30090 for Lexus GX460 RX350 Toyota 4Runner
Specifics:
Material: ABS Plastic
Condition: 100% Brand New
Type: Steering Angle Sensor Assembly
Fitment Type: Direct Replacement
Quantity: 1pcs
Manufacturer Part Number:84307-30090,89245-30110
Placement on Vehicle:Steering Wheel
Fitment For:
For Toyota Sienna (2011-2020 models,specifically LE,SE,L,and XLE trims with 2.7L and 3.5L engines)
For Lexus GX460 (2010-2020 models,compatible with Base Sport Utility 4-Door,Premium Sport Utility 4-Door,and Luxury Sport Utility 4-Door variants)
For Lexus HS250h (2010-2012)
For Lexus RX350 (2010-2013)
For Lexus RX450h (2010-2013)
For Scion tC (2011-2016 models with 2.5L engine)
For Toyota 4Runner (2010-2020 models equipped with 2.7L and 4.0L engines)
Package Included:
1x Steering Angle Sensor Assembly
Installation instructions:
Do not move the positioning pins during installation.
1. Return the steering wheel to the center position
2. Open the front cover of the steering wheel and take out the airbag spring (spring clock) inside
3. The angle sensor is located on the back of the spring. Remove the seal of the angle sensor and install the angle sensor in situ
Note: Keep the steering wheel back to the center position during installation. Do not turn the spring and angle sensor
4. After installation,reinstall the steering wheel. Open the repair computer and connect the car,turn on the steering angle learning function to reset the angle sensor,and check if there is a fault code or a fault light is on. If there is,remove the fault code. Complete the installation.
Specifics:
Material: ABS Plastic
Condition: 100% Brand New
Type: Steering Angle Sensor Assembly
Fitment Type: Direct Replacement
Quantity: 1pcs
Manufacturer Part Number:84307-30090,89245-30110
Placement on Vehicle:Steering Wheel
Fitment For:
For Toyota Sienna (2011-2020 models,specifically LE,SE,L,and XLE trims with 2.7L and 3.5L engines)
For Lexus GX460 (2010-2020 models,compatible with Base Sport Utility 4-Door,Premium Sport Utility 4-Door,and Luxury Sport Utility 4-Door variants)
For Lexus HS250h (2010-2012)
For Lexus RX350 (2010-2013)
For Lexus RX450h (2010-2013)
For Scion tC (2011-2016 models with 2.5L engine)
For Toyota 4Runner (2010-2020 models equipped with 2.7L and 4.0L engines)
Package Included:
1x Steering Angle Sensor Assembly
Installation instructions:
Do not move the positioning pins during installation.
1. Return the steering wheel to the center position
2. Open the front cover of the steering wheel and take out the airbag spring (spring clock) inside
3. The angle sensor is located on the back of the spring. Remove the seal of the angle sensor and install the angle sensor in situ
Note: Keep the steering wheel back to the center position during installation. Do not turn the spring and angle sensor
4. After installation,reinstall the steering wheel. Open the repair computer and connect the car,turn on the steering angle learning function to reset the angle sensor,and check if there is a fault code or a fault light is on. If there is,remove the fault code. Complete the installation.
